Maxtor 4 Channel Stand-alone DVMR Bedienungsanleitung Seite 1

93-1. Installation ConfigurationCHAP. 3 InstallationCHAP.3 Installation

101) Rack mount1. Remove 4 bolts on each side cap to install rack mount.2. Attach rack mount bracket to DVR.3. Attach DVR with rack mount

113) Camera4) MonitorConnect cameras to the camera input on rear panel of DVR marked CAMERA IN.LOOPCH3CH2CH1CH4VCRMONI TORCAMERA INConnect the video o

126) VCR, VIDEO PRINTER7) Other External DeviceLOOPCH3CH2CH1CH4VCRMONI TORCAMERA INConnect VCR or VIDEO Printer to VCR out on the rear panel of DVR.RS

138) Connector Pin Assignment9) RS-232C ASCII-codeNo Description NO Description1 DCD Data Carrier Detect 6 DSR Data Set Ready2 RxD Receive data 7 RTS

144-1. Power connectionCHAP. 4 OperationBefore you turn on the power switch, be sure the all necessary devices such as power adapter, cameras, and m

153. Status of DVR systemEmergency Record (Red) Schedule Record (Green)Record Stop (White) StopForward PlaybackBackward PlaybackPause1/4~1/2x forw

16CHAP. 4 Operation3) Picture in Picture(PIP View)When it is in full screen display mode, you can see other camera in a small window by pressingping

17CHAP. 4 Operation4-6. RecordRecording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default reco

18CHAP. 4 Operation4-8. SearchPress [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH w

1INSTALLATION & SAFEGUARDSAll the safety and operating instructions should be read before the unit is operated.Environment Condition for Installat

19CHAP. 4 Operation4-9. PAN/TILT/ZOOM Camera OperationPress [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction butt

20CHAP. 5 Set Up5-1. Entering into the MenuEnter into SYSTEM MENU by pressping [MENU] button.Button FunctionMENU Enter into SYSTEM MENU, Move to pre

21CHAP. 5 Set Up5-2. DIPLAY SETUPSetting up parameters for monitor and display on screen.Enter into SYSTEM MENU-DIPLAY SETUP.DISPLAY SETUPSCREEN DIS

22CHAP. 5 Set Up5-3. CONFIGURATIONVarious parameters for system can be set in CONFIGURATION menu.Enter into SYSTEM MENU-CONFIGURATION and press the [

23CHAP. 5 Set UpSet time and date of DVR system which is very important for search with time and date of the event. Time and date set by manufacturer

24CHAP. 5 Set Up(3) CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER]button to select [ON/OFF]. If it is s

25CHAP. 5 Set UpSet type of alarm sensors connected to DVR unit.N.O represents Normal Open type and N.C Normal Close type.5) ALARM SETUP1) ALARM INPU

26CHAP. 5 Set Up 7) PASSWORD SETUP-Use [UP] and [DOWN] button to move to optionand [LEFT] and [RIGHT] button to set user ID.The password must be cons

27CHAP. 5 Set Up5-4. RECORD SETUPThis is the most important configuration of the DVR.Enter into SYSTEM MENU-RECORD SETUPand press the [ENTER] button.

28CHAP. 5 Set UpUsers can set holidays on this calendar. When a holiday is selected, the DVR records as per the schedule record setting for Sundays.3

2ContentsContentsCHAP. 1 Features & Package Contents ---------------------------------------------------------------- 41-1. Features -------------

29CHAP. 5 Set Up5-5. BACK-UPCD-R SETUPHDD[START] 2005/AUG/07 AM04:04:12[ END ] 2005/AUG/08 PM08:12:23CD-R[START] 2005/AUG/07 AM04:04:12[ END ] 200

30CHAP. 5 Set Up2) RS-232C SETUPUser can control the DVR via RS-232C port.Connect DVR to PC via RS-232C port and usercan control DVR using keyboard

31CHAP. 5 Set Up5-7. FACTORY DEFAULTSet all system elements to the factory default value.Use the direction buttons to move and press the [ENTER] but

32CHAP. 6 Network Setup6-1. DVR Network ConfigurationNow that you are familiar with the equipment and should be able to identify a router from a mod

33CHAP. 6 Network SetupCase A : Single Static IP w/Personal RouterAccessing the DVR using the Remote Software for CASE AConfigure the DVR as follows

34CHAP. 6 Network SetupREMOTELY :To access the DVR remotely, that is from outside your local network, follow the abovedirections for accessing locall

35CHAP. 6 Network SetupREMOTELY :To access the DVR remotely, open the remote viewing software and click on the “Settings”button. As far as TCP/IP co

36CHAP. 6 Network SetupREMOTELY :To access the DVR remotely, that is from outside your local network, follow the abovedirections for accessing local

37CHAP. 6 Network Setup4. SUBNET MASK : 255.255.255.240 (example)a. Along with your static IP addresses you should have received your subnet maskfrom

38CHAP. 6 Network SetupConfigure the DVR as follows :For this application you can still use the DVR for remote access, yet you will have to verify t

3Contents4-9. PTZ Camera Operation ---------------------------------------------------------------- 194-10. Data Back-Up -----------------------------

39- Power switch : Press the Power switch to exit the program. Please disconnect the live feed before powering off the software- Connect button : Pres

40CHAP. 6 Network SetupSetting Screen PTZ TYPE : If using PTZ device or camera, select the protocol your PTZ camera is using from the list of precon

41PlAYBACK INTERFACE through Remote ViewerFunction of each button in Search window. Exit : Exit to live window. Full screen : Select a certain camera

42: Play Fast backward : Move to the start of recording: Play backward(1X): Move to the previous hour: Play Forward(1X): Move to the afterward hour: P

4310: CalendarUse this to select the date you wish to playback. The filled in square outlines the date that is at thebeginning of the hard drives. The

446-3. Back-up CD Player123456789To view the data stored on your backup CD from the DVR unit, please use this software. The functionsare described bel

45Image EDIT1231. Image edit status window : Shows record time & date, Image size, Command status.2. Edit button : User can adjust color tone of c

466-4. Frequently Asked QuestionsCHAP. 6 Network Setup

47CHAP. 6 Network Setup

48CHAP. 6 Network Setup

4Live ViewReal time display per cameraAuto SequencePIP (Picture in picture) Digital ZoomDisplay FreezeSimple Playback modeSimple PTZ camera controlRec

49CHAP. 6 Network Setup

50Can I configure my DVMR for remote access using a Dial-Up connection?Yes, it is possible, but not recommended. With a live video feed, the bandwidth

51• The best picture quality in Playback(JPEG-2000)• Real time live display in all channels• 4 channel video 240(200)ips recording capability• Triplex

5CHAP. 1 Features & Package Contents1-2. Package Contents1. DVR Main Unit2. Remote Controller3. Power Cable4. Power Adapter 5. User’s Manual6. S

6Name Function① LED Lamps Shows status of operation② USB Device Firmware upgrade by connecting PC with latest firmware to USB port③ IR IR receiver1. P

7Name FunctionPTZ On/Off for PAN/TILT/ZOOM control modePress this button first to control PTZ camera connected to DVR unit via RS-485ZOOM Zooming an i

8Name FunctionRS 485 Connection with PTZ Camera or other external device using RS 485interface (Pin No.1 & 2) 12345678910SENSOR InputVGAETHERNETRS