Maxtor HVR-04E Installationsanleitung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 57
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
INSTALLATION AND CONNECTION HVR-04E
INSTALLATION AND CONNECTION
4. Connecting & Running HVR-04E
4.1. Connecting camera
(1) Connect CCTV camera to HVR-04E with BNC cable as shown below.
(2) Set video type (NTSC/PAL) by rear panel’s switch.
<Note>
The video type for all channels should be either NTSC or PAL. NTSC is the standard used in North
America.
(3) Set the impedance control switch for each channel as needed.
<Note>
It may be necessary to configure impedance of video input differently for each channel. For more
detailed information, please refer to “Video type / impedance setup switch” in Appendix #2.
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare