Maxtor Digital Multiplex Recorder Bedienungsanleitung

16 Channel Multiplex Digital Video Recorder Models: DGN216 Installation / User Manual Digimerge Technologies Inc.

9 Back Panel 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-232 or to

10 Accessing the Main Menu The Menu allows you to configure your DVR settings and program various recording options. Follow these steps in order to

11 ► M 2002-JAN-01 01:02:03 M-HDD M 2002-JAN-01 01:02:03 M-HDD A 2002-JAN-01 01:02:03 M-HDD T 2002-JAN-01 01:02:03 M-HDD D 2002-JAN-01 01:02:03 S

12 Timer Recording Setup On the Main Menu, selecting the Timer option will allow you to set daily schedules in which you would like the DVR to automa

13 Record Settings On the Main Menu, selecting the Record option will allow you to set the quality and speed of recordings. Pressing ENTER after sc

14 Motion Trigger Record 1. Press ENTER to confirm MOTION TRIGGER RECORD setup. 2. Press▲ / ▼ to toggle the option between ON and OFF. 1. Select “ON”

15 Record Method This feature is used to select the DVR record method as either EVENT / NORMAL / OFF. 1. Press ▲ / ▼ to select the desired time came

16 Motion Detection Press MENU to enter the menu set up, then ▼ to CAMERA setup. Press ENTER twice to enter the Motion Detection setup. Each

17 Figure 1-1 MOTION DETECTION SETUP – 1~16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032

18 System Set Up The system menu is used to configure the system level options on the DGN216. To access the System features, press MENU followed by

1 Under the copyright laws, this documentation may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine

19 4. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit. Setting the Motion Audible Alarm feature If enabled, the buzz

20 2. Press ▲ / ▼ to choose a display format. Options are: Y-M-D = Year - Month - Day M-D-Y = Month - Day - Year D-M-Y = Day - Month - Year Off = The

21 No = Do not reset the system at this time. 3. Press MENU to exit this screen and confirm the current operation. 4. If you have completed all your

22 (Menu) Search Timer Record Camera System ► Event Network (Menu) Search

23 HDD Status – This will display either the remaining HDD capacity in GB or OW to indicate that it is set to Overwrite. Video Loss - Screen will d

24 Video Search The DVR allows you to easily find sections of recorded video using the Search feature. Press the SEARCH button and you will see the

25 Hardware Connection from DVR

26 3. Choose the destination location and press “Next”.

27 6. After the installation, the following files listed below will appear in your assigned path or file folder. There will be 6 files and 1 fold

28 Dynamic IP Setting WHAT IS A DYNAMIC IP ADDRESS? A Dynamic IP Address is an IP (Internet Protocol) address that changes each time

2 Table of Contents Important Safety Instructions...

29 4. After registering your account, you will receive an e-mail, which contains instructions to activate your account. If you do not follow these

30 2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is similar to th

31 5. Choose “Obtain an IP address automatically”.

32

33 3. In the “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set the “Port Number” to 80 for the Video Web Server. Set the “Local Serve

34 STEP 7 : Connect to the DVR via the Internet 1. Change PC network setting to the original setting and link PC to the internet. 2. Click

35 Software Operation at the Remote Site Follow the steps below to connect to a remote site. (e.g. If you set up the server at your office with

36 Control Panel and Basic Operation A. Video Web Server control panel

37 B. Digital device control panel

38 Advanced Settings Click on “System Config” for advanced setting.

3 Appendix 4: Rack Mount Installation ...

39 MAIL

40 TOOL BOX

41 Step 2: Enter your Username and Password to login to the Video Web Server.

42 Step 4: After you login, you will see the Video Web Server screen (example below).

43 Troubleshooting Check that the HDD has been installed correctly. No recorded video Check camera’s video cables and connections. Check monitor’s

44 Technical Specifications Video format NTSC/EIA or PAL/CCIR Network Interface Ethernet (10100 Base-T) Protocols TCPIP, ICMP, SMTP, HTTP, FTP T

45 Appendix 1: Installing the HDD NOTE: The HDD has the same purpose in a DGN216 as a videocassette does in a VCR. However, installing the HDD is

46 B (unlocked) A (locked) Step 6: Secure the HDD in the Cartridge Casing. Position the HDD into place and secure it using the six screws supp

47 Appendix 2: Connection Diagram to Cameras and Monitor

48 Appendix 3: Pin Configurations 25 Pin Com Port EXTERNAL ALAM NO EXTERNAL ALARM COM

4 Important Safety Instructions All the safety and operating instructions should be read before operating this equipment. The improper operation may

49 Appendix 4: Rack Mount Installation Screws and brackets for rack mounting applications can be purchased as an optional accessory. Front Angle wi

50 Appendix 5: Recording Times (in Hours) NTSC SYSTEM IPS 25A 15 8 4 2 1 Best 48hr 96hr 180hr 360hr 720hr 1440hr High 60hr 120hr 226hr 450hr 900hr

51 Appendix 6: Compatible HDD Brands Manufacturer Model CapacityRotationHITACHI Deskstar 180 GXP (120 GB) 120GB 7200 rpmHITACHI Deskstar 7K250, HDS

52 Limited Warranty Warranty: Subject to the exclusions and limitations below, Digimerge warrants to the initial end-user purchaser that the product

53 Digimerge Technologies Inc. 300 Alden Road Markham Ontario L3R 4C1 www.digimerge.com

5 Introduction The DGN216 combines a 16 channel multiplexer with a Digital Video Recorder (DVR). The DVR offers many advantages over traditional tim

6 System Contents The DGN216 box should include the items listed below. Please take a moment to verify that no items are missing from the package.

7 Front Panel Controls 1. Removable Cartridge Casing The DGN216 comes with 2 removable hard disk drive cartridges. 2. MENU Press

8 13. REC Press REC to start recording. (The icon will appear in the top-right corner of the screen when recording is in progress.) 14. REW / ◄ T