Maxtor Built in Digital Video Recorder Bedienungsanleitung

VER1.04Channel Built in DVR

91) Connector cover bracketCHAP. 3 Installation3-2. Detailed Installation

102) CameraConnect cameras to the camera input on rear panel of Built in DVR.Connect the video output MONITOR to Video-In of Main monitor.4) Power3) M

115) VCR, VIDEO PRINTER6) Other External DeviceConnect VCR or VIDEO Printer to VCR out on the rear panel of Built in DVR.RS-232C : Control DVR through

127) Connector Pin Assignment8) RS-232C ASCII-codeNo Description NO Description1 DCD Data Carrier Detect 6 DSR Data Set Ready2 RxD Receive data 7 RTS

13CHAP. 4 Operation4-1. System Log-InDVR LOG-INENTER PASSWORD : _ _ _ _ _ _ _ _INPUT YOUR OWN PASSWORDTO EXIT, PRESS [MENU]1) After recognition to

143. Status of DVR systemSchedule Record (Green)Record Stop (White) StopForward PlaybackBackward PlaybackPause1/16~1/2x forward playback1/16~1/2x back

15CHAP. 4 Operation3) Picture in Picture(PIP View)When it is in full screen display mode, you can see other camera in a small window by pressing [PI

16CHAP. 4 Operation4-5. RecordRecording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default reco

17CHAP. 4 Operation4-7. SearchPress [SEARCH] button, and 3 different methods for searching recorded data are available as shown in following SEARCH w

18CHAP. 4 Operation4-8. PAN/TILT/ZOOM Camera OperationPress [PTZ] button first for PTZ control mode. User can control PTZ camera connected to DVR un

1INSTALLATION & SAFEGUARDSAll the safety and operating instructions should be read before the unit is operated.Environment Condition for Installat

19CHAP. 5 Set Up5-1. Entering into the MenuEnter into SYSTEM MENU by pressing [MENU] button.Button FunctionMENU Enter into SYSTEM MENU, Move to prev

20CHAP. 5 Set Up5-2. DISPLAY SETUPSetting up parameters for monitor and display on screen.Enter into SYSTEM MENU-DIPLAY SETUP.DISPLAY SETUPSCREEN DI

21CHAP. 5 Set Up5-3. CONFIGURATIONVarious parameters for system can be set in CONFIGURATION menu.Enter into SYSTEM MENU-CONFIGURATION and press the [

22CHAP. 5 Set UpSet time and date of DVR system which is very important for search with time and date of the event. Time and date set by manufacturer

23CHAP. 5 Set Up(3) CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER]button to select [ON/OFF]. If it is s

24CHAP. 5 Set UpSet type of alarm sensors connected to DVR unit.N.O represents Normal Open type and N.C Normal Close type.5) ALARM SETUP4) INTERVAL S

25CHAP. 5 Set Up 7) PASSWORD SETUP-Use [UP] and [DOWN] button to move to optionand [LEFT] and [RIGHT] button to set user ID.The password must be cons

26CHAP. 5 Set Up5-4. RECORD SETUPThis is the most important configuration of the DVR.Enter into SYSTEM MENU-RECORD SETUPand press the [ENTER] button.

27CHAP. 5 Set UpUsers can set national holiday or holidays on calendar to record just as setting for Sunday in SCHEDULE REC SETUP.3) HOLIDAY SETUPHOL

28CHAP. 5 Set Up5-5. BACK-UPCD-R SETUPHDD[START] 2005/AUG/07 AM04:04:12[ END ] 2005/AUG/08 PM08:12:23CD-R[START] 2005/AUG/07 AM04:04:12[ END ] 200

2ContentsContentsCHAP. 1 Features & Package Contents ---------------------------------------------------------------- 41-1. Features -------------

29CHAP. 5 Set Up2) RS-232C SETUPUser can control the DVR via RS-232C port.Connect DVR to PC via RS-232C port and control DVR using keyboard of PC.T

30CHAP. 5 Set Up5-7. FACTORY DEFAULTSet the all system parameters as manufacturer first set before delivery. It is a kind of system initialization,

31CHAP. 6 Network Setup6-1. DVR Network ConfigurationNow that you are familiar with the equipment and should be able to identify a router from a mod

32CHAP. 6 Network SetupCase A : Single Static IP w/Personal RouterConfigure the DVR as follows :1. Set the DVR to MANUAL for the TCP/IP settings. Do

33CHAP. 6 Network SetupREMOTELY :To access the DVR remotely, that is from outside your local network, follow the abovedirections for accessing locall

34CHAP. 6 Network SetupREMOTELY :To access the DVR remotely, open the remote viewing software and click on the “Settings”button. As far as TCP/IP co

35CHAP. 6 Network SetupREMOTELY :To access the DVR remotely, that is from outside your local network, follow the abovedirections for accessing local

36CHAP. 6 Network Setup4. SUBNET MASK : 255.255.255.240 (example)a. Along with your static IP addresses you should have received your subnet maskfrom

37CHAP. 6 Network SetupConfigure the DVR as follows :For this application you can still use the DVR for remote access, yet you will have to verify t

38- Power switch : Press the Power switch to exit the program. Please disconnect the live feed before powering off the software- Connect button : Pres

3Contents4-8. PTZ Camera Operation ---------------------------------------------------------------- 184-9. Data Back-Up ------------------------------

39CHAP. 6 Network SetupSetting Screen PTZ TYPE : If using PTZ device or camera, select the protocol your PTZ camera is using from the list of precon

40PLAYBACK INTERFACE through Remote ViewerFunction of each button in Search window. Exit : Exit to live window. Full screen : Select a certain camera

41: Play fast backward : Move to the start of recording: Play backward(1X): Move to the previous hour: Play forward(1X): Move to the afterward hour: P

4210: CalendarUse this to select the date you wish to search. The filled in square outlines the date that is at thebeginning of the hard drives. The o

436-3. Back-up CD Player123456789DVR units are with a built-in CD-RW, and user can copy images to CD.Using back-up CD player, user can see images on b

44Image EDIT1231. Image Edit Status Window : Shows record time & date, Image size, Command status.2. Edit Button : User can adjust color tone of c

456-4. Frequently Asked QuestionsCHAP. 6 Network SetupF A QHow do I determine my PC’s TCP/IP settings?For Window 98 / Me Users1. Click on the Start M

46How do I “ PING” an IP address ?1. Open an MS-DOS (or Command) prompt2. At the prompt type –“ping xxx.xxx.xxx.xxx” (without the quotes and replace

47CHAP. 6 Network SetupCan I configure my DVMR for remote access using a Dial-Up connection?Yes, it is possible, but not recommended. With a live vid

48CHAP. 7 SpecificationsCHAP. 7 Specifications7-1. Specification of DVR• The best picture quality in Playback(JPEG-2000)• Real time live display in

4Live ViewReal time display per cameraAuto SequencePIP (Picture in picture) Digital ZoomDisplay FreezeSimple Playback modeSimple PTZ camera controlRec

49CHAP. 7 Specifications7-2. Specification of MonitorDisplay type15” Diagonal Active-matrix TFT LCDBrightnessl 250cd/m2 (Typical)700:1Contrast RatioR

50MEMOMEMO :

51Best Picture Quality - JPEG2000

5CHAP. 1 Features & Package Contents1-2. Package Contents1. Built In DVR Main Unit2. Remote Controller3. Power Cable4. Power Adapter 5. User’s M

6Name Function① Camera selection Pressing this button will display a full screen image of that cameraSTOPPlayback stop and return to Schedule Record

7Name FunctionRS 485 Connection with PTZ Camera or other external device using RS 485 interface12345678SENSOR InputETHERNETRS-232CCAMERA InputLOOP Out

83-1. Installation ConfigurationCHAP. 3 InstallationCHAP.3 Installation