Maxtor Shared Storage Plus+ Bedienungsanleitung PDF herunterladen (Seite 67)

Using the Shared Storage 65

Disconnecting a USB drive

To disconnect a USB drive from your Maxtor Shared Storage Drive:

1. Go to the Maxtor Shared Storage Drive home page.

2. Click the Advanced Settings button.

3. Click Conﬁgure Your USB Devices.

4. Click Unplug USB devices from the Shared Storage Drive.

5. Click the Safely Remove button, next to the USB drive you want to

disconnect. A message will appear informing you that your drive can be

safely removed. Then click Done.

6. Disconnect your USB drive from the your Shared Storage Drive.

Using USB Printers with your drive

You may connect a USB printer to your Shared Storage Drive and share it

with anyone on your network.

Connecting a USB printer

• Connect the USB printer while your Shared Storage Drive is on.

• The printer will appear in the list of shares displayed in the Printers and

Faxes folder on your Shared Storage Drive.

To use the printer from a Windows PC, install the driver included with your

printer on that speciﬁc Windows PC:

1. Under the Start menu, select Control Panel and then click Printers and

Other Hardware.

The Printers and Other Hardware window will appear.

2. Click View installed printers or fax printers.

The printers or fax printers that you have installed on your computer

should appear in this window.

3. Drag and drop the icon that corresponds to the printer you wish to install

into the Printers and Faxes folder on your Windows PC.

You will need your original printer install disk to install the printer

driver on your Shared Storage Drive.

4. Follow the on-screen instructions to install your printer.

Shutting down your drive

To safely shut down your Shared Storage Drive:

Press and hold the button on the front of your drive for 5 seconds.

Figure 6. Shutting down your drive

The button light will change from green to yellow, indicating that the drive is

shutting down. When the light goes off, your drive is completely shut down.

Resetting your drive

If you can not access your drive after moving it to another network or turning

it on after it has been off for a period of time, it may need to be reset.

To reset your drive:

• With the drive turned on, use a small pointed object, like the tip of a pen

or paperclip, press and hold the reset button on the back of your drive

until the button light turns yellow, and then release. (See ﬁgure 7).

• After a few seconds, the drive will reboot.

• When the light changes to green, the reset is complete and your drive

is ready for use.

Figure 7. Resetting your drive

After you reset your Shared Storage Drive, its name will be will be

reset to the original name when you installed it. (Example: MSS-

000335). In addition, the workgroup will be reset to MSHOME.

Press the button.

Press and hold the reset button.

1 2 ... 62 63 64 65 66 67 68 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxtor Shared Storage Plus+ Bedienungsanleitung Seite 67

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Maxtor Shared Storage Plus+